Nanning Maobo Traffic Equipment Sales Center

-Type
Remote control automatic/manual dual-use portable car arrester
Instruction manual
--, Overview:
-Type
Remote control automatic/manual dual-use portable car arrester Nail is a new generation roadblock developed by our company by studying the latest traffic blocking technology at home and abroad. It adopts an electromechanical integrated remote control device. It is light in weight, easy to carry, easy to operate, safe and reliable. It can be set up at any time for mobile deployment without affecting the smooth flow of normal roads. It is suitable for law enforcement such as public security, armed police and public security. The department needs advanced equipment that is indispensable when setting up cards to intercept suspect vehicles.
The main body of the roadblock is made of high-strength alloy aluminum spikes, the alloy steel shell is used, the engineering plastic power supply is used, and the new lithium-ion battery is used to ensure the use time and superior electrical performance of the roadblock.
Execution standards: Performance complies with the "/-Puncture and Deflation Roadblock" standard for the public security industry of the People's Republic of China. It has an inspection report from the Special Police Equipment Quality Supervision and Inspection Center of the Ministry of Public Security.
2. Main technical parameters:
, effective length of roadblock: (-adjustable), effective length of deflated steel nails:
, effective spacing of deflated steel nails, deployment (recycling) speed: / (Grade pavement)
, Loading weight: ≮, Remote control distance:
, Working voltage: - (LCD display with voltage)
, Power supply capacity: / (Lithium battery, with over-discharge protection)
, continuous working time: continuous retracting and retracting operations, standby time in hours
, charging power supply charging time: -, car charger: charging time:
, overall machine weight, box size ：
3. Working environment:
, Ambient temperature: -℃, can be used normally in rainy days (not soaked in water)
4. Instructions for use:
, equipped with box wheels Place the traction device facing down on the road, open the locks on both sides in the unfolding direction, and turn on the power switch of the traction device (the red button lights up to indicate standby mode).
Pull out the remote control antenna and press the forward button (up button). The nail strip will expand to the required length and release the button to stop.
. Press the back button (down button) when retracting. After the nail belt is retracted, release the button to stop.
(Note: The remote control is equipped with a delay function. When operating, master the advance amount, otherwise it will cause damage due to strong inertia impact on the box)
When collecting the box, match the traction device with the interface of the nail box and then Put the box upright and press the locks on both sides.
Please choose a flat road surface when laying out.
If the remote control operation is not possible due to electromechanical failure, you can hold the traction device to pull out the nail strip to complete the deployment manually.
5. Precautions: (Please read carefully before use)
Because the turning nails are sharp, be careful to avoid injury during operation and maintenance.
When laying out the spike strips, special personnel must be on duty to avoid accidental injury to pedestrians and vehicles.
During the deployment and interception, it is strictly prohibited for any person to appear within 1 meter of the inertia direction of the intercepted vehicle and the spike strip to avoid personal injury caused by the vehicle losing control after a tire puncture
and other reasons.
When the equipment is idle for a long time
It needs to be charged once every day or so (the LCD voltmeter is lower than .). The power switch must be turned off in time after use.
It is strictly prohibited to drop or hit the equipment box maliciously.
This product is an electromechanical product. Please pay attention to waterproofing, moisture-proof, and sun exposure during use and storage.
When reinstalling the nails, be sure to place the rubber ring on the top of the nail shaft (nail base) first, otherwise the nails will fall off easily.
6. Judgment and maintenance of general faults
If a remote control fault occurs, please follow the following steps:
Check whether the power supply of the remote control is normal (whether the battery of the remote control needs to be replaced).
Check whether the power supply of the equipment box is normal (the lithium battery can be continuously retracted and retracted remotely for more than
hours or can be kept on standby for more than
hours on a normal charge. If the equipment's working efficiency drops significantly, consider replacing it with a new battery).
Check whether the circuit board is normal (whether the circuit board indicator lights up when the power is turned on).
If the nail strip (aluminum strip) cannot be retracted and retracted normally due to deformation, please manually adjust the deformed aluminum strip to straighten it to return to normal.
The product is an electromechanical product and it is strictly prohibited for non-professionals to disassemble it by themselves.
7. Configuration list
Serial number
Name
Quantity
Unit
Remarks

Roadblock body
Parts
/>
Remote Control
Only

Remote Control Battery
Only

Charger
Only

Car charger
Only

Spare nail
Support

Spare rubber ring
Only

Use Instructions
Copy

Certificate
Copy